Wifi Smart Gas Water Valve Controller
Specifications
|
Communication method |
Wi-Fi |
|
Material |
ABS+Metal |
|
Color |
Black White |
|
Plug (optional) |
European/US regulation |
|
Power supply voltage |
12V/1A |
|
Communication technology |
WIFI |
|
Communication frequency |
2.4G |
|
Rated power |
1.2w |
|
Radio range |
30 meters |
|
Valve pressure |
1.6 meters |
|
Valve pressure |
1.6MPA |
|
Torque |
30-60kg.cm |
|
Insulation resistance |
greater than 20M |
|
Applicable Scenario |
Suitable for 4,6, 1 inch, 1.25 inch water pipeline ball valves, butterfly valves. Easy to install, no need to change the original design of gas and water piping configuration, users can install by themselves. |
1. Manual Valve Control: The smart gas valve allows for manual open and closing, giving you complete control over your home's gas supply. This smart gas valve permits you to effortlessly and conveniently regulate your gas usage.
2. Compatible with Alexa: This garden water shut off is Alexa-compatible, allowing you to control the valve using voice commands. Simply connect it to your Alexa-enabled devices and enjoy hands-free control of your gas valve.
3. Automatic Gas Shut-Off: When a leak is detected, the irrigation controller automatically turns off the gas supply, assuring the safety and reliability of your home. You may rest assured that this smart device will proactively protect your home from potential gas-related threats.
4. Home Automation: Due to the WiFi water valve falls under the home automation category, you can easily link it into your existing smart home system. Connect it to other compatible devices, control it remotely, and include it into personalized routines or scenes to increase convenience and efficiency.
5. Simple Installation and Setup: The gas shutoff ball valve installs quickly and easily. It has clear instructions and user-friendly features that make installation simple. Get your smart gas valve up and running quickly, and experience the benefits of smart gas management at home.
How to Integrate with the App
1. Download "Tuya Smart"or "Smart Life"APP
(scan the QR code or download the APP from Google Play/iOS),create new Account ID and password to login(if not already registered)
2. Add device
Click "+", select "Other" from the bottom tab and then select "Others (Wi-Fi)".
3. Press the power button
Press the power button of smart valve for about 5 seconds until the indicator light flashes quickly, smart valve controller enters into pairing state
4. Select you Wifi SSID
Input WIFI password and proceed to next screen. (NOTE:The device supports only 2.4G Wi-Fi)
5. Connection running
Wait about 30-60 seconds until the device connects successfully, Perfect!!
6. Select "Auto Scan"Mode
According to the prompt, the smart valve controller will be connected to the network automatically
How to link with other smart devices
1. Please open "Tuya Smart"or"Smart Life"APP and the click "Smart" tab located on the midbotom of APP screen.
2. Click"+"(top right of screen) to create a link with other smart devices.
3. Select "When device status change" and the select advice which you want Smart Valve to connect with Smart Water/flood sensor.
4. Select the status of the device(On/Off).
5. Then Select "Run the device" and select smart valve controller.
6. Click "Next" and finally "Save". Perfect!! You created a smart connection between Water leak sensor and water valve.
7. Whenever water leak age is detected, with this smart linkage water valve will close automatically.
8. Similar linkages can be created with other smart devices.
FAQ
Q1. The valve controller switch is not in place.
Ans: Please check whether the smart valve controller center and the valve center are aligned. If they are not aligned, then not only it will make the valve switch not work properly but also bum the smart valve controller's motor.
Q2. The valve switch is stuck.
Ans: Please pull down the clutch pull ring and swing the smart valve controller's handle 90 degrees until the valve can be switched smoothly. If the valve is too tight, please apply some grease to it or replace it.
Q3. The smart valve controller cannot be paired in to the network.
Ans: Please make sure you're using 2.4Ghz WFI, Signals are present and strong,and password is correct. While smart valves controller is in pairing mode, please keep it as close to the router as possible. (for best possible results). Please follow instructions as given above.
Send a message
